Posts tagged with "Tile Gasket"

Fun Friday!

As IWF draws near once again we like to take a look at how much progress we’ve made over the last year.

We are always trying to improve vacuum performance and help CNC owners and operators MAX YOUR VAC.

This year we will be show casing our Tile Gasket which we’ve developed over the last year to increase vacuum surface area on MDF and other porous spoilboards. Excellent for Custom jobs, Nesting Programs, and Short Run applications.

Throw back to how funny our booth looked at the 2018 IWF show Pre-Covid. Come check us out this year and see how much progress we’ve made over the last 4 years, we’ll be show casing demos on our mini vacuum table using gasket.

 

More Vacuum or More Gasket?

What Can You do to Improve Your Vacuum’s Performance?

You can’t turn your vacuum up to 11, but you can hold parts more securely using gasket!

There are two modes of thought using gasket. First is using our Grid Gasket to seal the bottom perimeter of your porous spoilboard or dedicated fixture. This will help focus your draft through the top of your porous material or vacuum ports and will secure your working area for your parts to rest on.

The next step is creating an airtight seal between your spoilboard and your raw material, the parts we want to cut. We do this using a variety of gasket methods as no two shops or projects are the same.

Our On-Board adhesive gasket is best suited for short run projects and is a peel and stick gasket tape. This is the quick and dirty method of creating a semi dedicated fixture on your spoilboard.

The Tile Gasket is excellent for full sheet and nested program cutting applications where sizes and shapes vary between sheets of material and final product. With vacuum holes punched every one inch it is possible to hold onto parts as small at 3″ x  4″ square.

Cover Gasket is a full sheet of gasket material that covers the entire surface of the spoilboard. This material is used to create a stencil of your product with an area removed for a vacuum space to be created. Great for small parts with narrow corners and sharp edges.

With a good seal and proper vacuum there is no need to screw down small parts, use clamps or buy a larger pump.

Stop the leak, Hold it better, Cut it better, Profit Better.

MAX YOUR VAC with All Star CNC.

WEEKLY RECAP, 2022 WEEK 29

All Star CNC Weekly Recap 7/18 – 7/25

Busy week here at All Star CNC as we continue to add 10 new customers and assist those looking to improve their vacuum’s performance.

– Monday

We helped a new client with their Biesse CNC router utilizing our Tile Gasket to improve the holding and cutting capabilities for small ABS plastic parts.

-Tuesday

Updated our Youtube channel and added our new Cover Gasket and InBoard Gasket videos to our playlist.

Assisted a new customer with their Techno LC, 4 x 8, CNC table by recommending the correct Grid Gasket size for their table and spoilboard.

-Wednesday

Recommended a new client working in the cabinetry industry to our Tile Gasket as means to improve their Nesting Base Manufacturing by optimizing vacuum surface space for custom design cabinetry.

-Thursday

A customer was recommended to us by Camaster to improve their vacuum table’s performance in holding custom molding and narrow lumber. Diagnosed their vacuum leak problem and was able to recommend some of our Grid Gasket along with our Tile Gasket to improve vacuum surface space.