Posts tagged with "Table Gasket"

CNC Grid Gasket

g

An Essential Starting Point For Any Vacuum Table is The Gasket Between Your Grid Table and MDF Spoilboard. “The Lip of The Freezer Door” to Focus Your Vacuum Through The Top of Your MDF Spoilboard

The very first thing that is needed for CNC Router Vacuum success? Grid Gasket for the table itself. Get that air-tight seal and prevent leak from that gap that exists between the table and the spoilboard/fixture board.

What product produces the best vacuum performance for your table? Depends on the size of your table’s channels. Square channels need square gasket. And the proper size is crucial. Too short and there will not be a seal, causing vacuum leak. Too tall above the channel and the gasket will not be able to “zero out” on the z-depth, causing vacuum leak.

All Star custom cuts gasket to fit any table’s channel dimensions. In order to MAX YOUR VAC, start at the “foundation of the house” with proper Grid Gasket. Our customers have been getting more parts in less time for 20+ years because we help them reduce vacuum related challenges.

#allstarcnc #cncgasket #MAXYOURVAC #cncrouter #spoilboard #vacummclamp #workholding #cncwoodworking #cncrouterparts #cncrouting #cncwood

CNC Collaboration with CR Onsrud

A big “THANK YOU” goes out to the team at CR Onsrud, Inc. for hosting All Star CNC and Head Coach Mike Murphy in town a few months back.

          We were asked to collaborate on some videos together, designed to educate customers on the importance of gasket and how crucial it is in getting the maximum performance out of a CNC Router’s vacuum table. They have amazing routers being made there in Troutman, NC capable of amazing things. So don’t let a leaky spoilboards or vacuum tables be the weak-link in terms of what size/speed/performance your router is capable of. Our Gaskets create an air-tight clamping environment, making more parts in less time. MAX YOUR VAC with All Star CNC Gasket Products.

CR Onsrud will be at #iwf2022 in a few weeks. Be sure to stop by and see what they have to offer!

All Star CNC Products will also be attending #iwf2022 in a few weeks. Come say hi and meet Head Coach Mike Murphy!

https://www.youtube.com/watch?v=2HEAyh9RpPQ