Posts tagged with "spoilboard"

FIXTURE FRIDAY 9/23/22

Parlor

Parlor Skis Utilizing The Versatile Surface Area of Our Tile Gasket (TG CR 06) to Cut The Core Shape of Their Snowboards.

A photo of a very happy customer of ours sent us this to demonstrate how they are utilizing our Tile Gasket material to improve their work holding on their CNC Router’s spoilboard. If you can’t hold it, you can’t cut it. Our clients around the country get more parts in less time with less waste. They can do this because we help them to MAX YOUR VAC by eliminating vacuum leak.

Anyone else having issues with part movement on your CNC router?

#allstarcnc #cncgasket #MAXYOURVAC #spoilboard #cncrouter #cncsnowboard #cncwoodworking #cncvacuum

MAX YOUR VAC with All Star CNC Products’ YouTube channel & Mike Murphy

 

Mike Murphy All Star CNC Products YouTube

MAX YOUR VAC with All Star CNC Products and Mike Murphy

YouTube Thumbnails

All Star CNC Products’ Video Playlist

No better source to MAX YOUR VAC for CNC Router operators than All Star CNC Products’ new and expanding YouTube Channel. It can be found at:

YouTube.com/c/ALLSTARCNCPRODUCTS

The videos we are creating are designed to help educate any shop having vacuum-related challenges when it comes to holding their parts. Our goal is to improve the vacuum clamping capabilities of CNC Routers, and to hold parts more securely for a higher degree in quality with less waste in both time in money. More parts in less time. MAX YOUR VAC with All Star CNC Products YouTube Videos.

#allstarcnc #cncrouter #MAXYOURVAC #spoilboard #madeinamerica #youtube #cncwoodworking #cncroutertable #cncgasket #cncwoodrouter

FIXTURE FRIDAY 9/6/22

All Star CNC_ Cover Gasket

Reduce The Number of Passes it Takes to Cut Small Parts Using Cover Gasket!

Great example of how proper gasket solutions can increase productivity. In this #FixtureFriday image, we can see where customer used a non-porous fixture to make an air-tight clamp on his parts. By doing so, he eliminated the need for cutting parts in two passes. For the 300,000 parts he had to make, that was a lot of unnecessary re-cuts in our opinion. More parts in less time is possible when you can MAX YOUR VAC.

#allstarcnc #cncrouter #spoilboard #covergasket #cncwood #cncwoodrouter #cncvacuum #cncroutertable

All Star CNC New Content Release, YouTube

New content on our YouTube channel!

Our Tile Gasket video released today helping those looking to improve their CNC Router’s vacuum performance. The subject of this video is All Star CNC’s Tile Gasket and our brand new SpoilTiles. These videos are intended to educate and improve vacuum performance. Preventing vacuum leak is the best way to improve a vacuum’s performance. These unique Tile Gasket products have become part of everyday router operations for so many of our customers across the country. It allows them to cut more parts in less time. Come take a look at these items (and many others) at the #iwf2022 at booth #B6524.

MAX YOUR VAC

#allstarcnc #cncrouter #madeinamerica #spoilboard #gasket

 

T.G.I.M!! 8-15-22

T.G.I.M.!!

If you are cutting parts of a CNC router this week, consider utilizing the benefits of All Star’s Tile Gasket material.

When applied to the surface of a porous MDF spoilboard, Tile Gasket eliminates leak from the spoilboard while at the same time creating vacuum clamp on the PART.

Come see this material in action at the #iwf2022 next week. Get more quality parts in less time as so many All Star CNC customers have done over the last 20+ years.

MAX YOUR VAC #allstarcnc #tilegasket #MAXYOURVAC #spoilboard #madeinameica #cncrouter #woodworking

 

Fixture Friday!!

Fixture Friday!!

Great use of All Star CNC’s Tile Gasket by this Laguna Tools customer. Tile Gasket minimizes vacuum leak on a porous MDF spoilboard by covering the working surface area with gasket, which maximizes vacuum performance. This customer was able to essentially make a Dedicated Fixture in a fraction of the time. Now he is getting more parts in less time off of his router and is very happy that he found us.

MAX YOU VAC! With All Star CNC Products

Tile Gasket Dedicated Fixture

Tile Gasket Used to Make a Dedicated Fixture to Hold Parts and Waste Material.

CNC Collaboration with CR Onsrud

A big “THANK YOU” goes out to the team at CR Onsrud, Inc. for hosting All Star CNC and Head Coach Mike Murphy in town a few months back.

          We were asked to collaborate on some videos together, designed to educate customers on the importance of gasket and how crucial it is in getting the maximum performance out of a CNC Router’s vacuum table. They have amazing routers being made there in Troutman, NC capable of amazing things. So don’t let a leaky spoilboards or vacuum tables be the weak-link in terms of what size/speed/performance your router is capable of. Our Gaskets create an air-tight clamping environment, making more parts in less time. MAX YOUR VAC with All Star CNC Gasket Products.

CR Onsrud will be at #iwf2022 in a few weeks. Be sure to stop by and see what they have to offer!

All Star CNC Products will also be attending #iwf2022 in a few weeks. Come say hi and meet Head Coach Mike Murphy!

https://www.youtube.com/watch?v=2HEAyh9RpPQ

T.G.I.M!!!!

T.G.I.M!!!!

If you plan to cut parts on your CNC router this week, remember…

If you are having trouble holding your parts properly somebody may tell you that you need to upgrade to a larger vacuum pump on your CNC vacuum table. That same person may tell you that if your ice cream is melting, that you’ll need a stronger, more powerful freezer. Upgrading either will cost money.  Not just the cost of initial upgrade, but the increase cost of additional electricity consumption as well.  We here at All Star CNC Products say, before upgrading your vacuum pump (or your freezer for that matter), make sure that all of your seals are preventing leak.

Vacuum pressure leak is why vacuum tables can’t hold parts.  The proper gasket material is essential to holding parts.  An air-tight system holds parts firmly in place, allowing to cut more parts in less time.  MAX YOUR VAC with All Star CNC Products, your ONLY solution to CNC gasket.

Comes see us at #iwf2022 in Atlanta, booth B6524 to learn more about how we have been helping our customers maximize their vacuum performance for over two decades.     #allstarcnc #cncgasket #cncrouter #spoilboard

 

IWF Atlanta

EDUCATIONAL SESSIONS

Increase CNC Router Performance by Improving Vacuum w/ Gasketing Products & Techniques

Tuesday, August 23  1:00 PM – 2:30 PM

When it comes to holding parts on a CNC Router, vacuum is the most common (and often only) method being used today.  With that being the case, why not maximize a vacuum’s performance if vacuum is the ONLY thing holding parts?

Shops will source everything from which router to invest in, to software, to tooling, to material, to employees and customers.  But when it comes time to actually cutting parts fast and effectively, was the router able to do it, yes or no?  If parts are too small, or onion skins or tabs are needed, or feed rates are painfully slow, or material is being wasted, or time is being wasted on re-setting up, than we need to improve the vacuum’s performance by eliminating leak.  Gasket products and solutions are the only way to improve a vacuum system’s performance.

In this session, you will learn how to eliminate vacuum pressure loss.  Users who hold parts better, make more parts in less time.  Whether it is small parts or large, production runs or custom work, wood or plastic, big vacuum systems or small, the same science always applies to eliminate vacuum pressure loss and we do this with gasketing products and techniques.

Presented by:

Mike Murphy

Head Coach at All*Star CNC Products, Inc

Michael Murphy has been assisting the owners and operators of CNC Routers for over twenty years. Michael’s area of concentration is in improving the vacuum hold performance of CNC Routers with gasketing products and techniques. He has assisted facilities of all sizes throughout North America fabricating a variety of materials across numerous industries. Michael enjoys the outdoor activities and lifestyle of Northern California, where he is Owner at All Star CNC Products, and especially when joined by his wife, Margo, and two young children.

More Vacuum or More Gasket?

What Can You do to Improve Your Vacuum’s Performance?

You can’t turn your vacuum up to 11, but you can hold parts more securely using gasket!

There are two modes of thought using gasket. First is using our Grid Gasket to seal the bottom perimeter of your porous spoilboard or dedicated fixture. This will help focus your draft through the top of your porous material or vacuum ports and will secure your working area for your parts to rest on.

The next step is creating an airtight seal between your spoilboard and your raw material, the parts we want to cut. We do this using a variety of gasket methods as no two shops or projects are the same.

Our On-Board adhesive gasket is best suited for short run projects and is a peel and stick gasket tape. This is the quick and dirty method of creating a semi dedicated fixture on your spoilboard.

The Tile Gasket is excellent for full sheet and nested program cutting applications where sizes and shapes vary between sheets of material and final product. With vacuum holes punched every one inch it is possible to hold onto parts as small at 3″ x  4″ square.

Cover Gasket is a full sheet of gasket material that covers the entire surface of the spoilboard. This material is used to create a stencil of your product with an area removed for a vacuum space to be created. Great for small parts with narrow corners and sharp edges.

With a good seal and proper vacuum there is no need to screw down small parts, use clamps or buy a larger pump.

Stop the leak, Hold it better, Cut it better, Profit Better.

MAX YOUR VAC with All Star CNC.