Posts tagged with "onboard gasket"

MAX YOUR VAC with All Star CNC Products’ YouTube channel & Mike Murphy

 

Mike Murphy All Star CNC Products YouTube

MAX YOUR VAC with All Star CNC Products and Mike Murphy

YouTube Thumbnails

All Star CNC Products’ Video Playlist

No better source to MAX YOUR VAC for CNC Router operators than All Star CNC Products’ new and expanding YouTube Channel. It can be found at:

YouTube.com/c/ALLSTARCNCPRODUCTS

The videos we are creating are designed to help educate any shop having vacuum-related challenges when it comes to holding their parts. Our goal is to improve the vacuum clamping capabilities of CNC Routers, and to hold parts more securely for a higher degree in quality with less waste in both time in money. More parts in less time. MAX YOUR VAC with All Star CNC Products YouTube Videos.

#allstarcnc #cncrouter #MAXYOURVAC #spoilboard #madeinamerica #youtube #cncwoodworking #cncroutertable #cncgasket #cncwoodrouter

More Vacuum or More Gasket?

What Can You do to Improve Your Vacuum’s Performance?

You can’t turn your vacuum up to 11, but you can hold parts more securely using gasket!

There are two modes of thought using gasket. First is using our Grid Gasket to seal the bottom perimeter of your porous spoilboard or dedicated fixture. This will help focus your draft through the top of your porous material or vacuum ports and will secure your working area for your parts to rest on.

The next step is creating an airtight seal between your spoilboard and your raw material, the parts we want to cut. We do this using a variety of gasket methods as no two shops or projects are the same.

Our On-Board adhesive gasket is best suited for short run projects and is a peel and stick gasket tape. This is the quick and dirty method of creating a semi dedicated fixture on your spoilboard.

The Tile Gasket is excellent for full sheet and nested program cutting applications where sizes and shapes vary between sheets of material and final product. With vacuum holes punched every one inch it is possible to hold onto parts as small at 3″ x  4″ square.

Cover Gasket is a full sheet of gasket material that covers the entire surface of the spoilboard. This material is used to create a stencil of your product with an area removed for a vacuum space to be created. Great for small parts with narrow corners and sharp edges.

With a good seal and proper vacuum there is no need to screw down small parts, use clamps or buy a larger pump.

Stop the leak, Hold it better, Cut it better, Profit Better.

MAX YOUR VAC with All Star CNC.