Posts tagged with "MAX YOUR VAC"

FIXTURE FOCUS 9/30/22

JT FINNERAN FIXTURE FOCUS

The Most Efficient Way to Hold Parts Securely is by Making a Dedicated Fixture Specific to Your Parts. Run Production Jobs in One Pass, Eliminate Onion Skins or Tabs. More Parts in Less Time. (Inboard Gasket CR 25 25)

This customer is putting his Dedicated Fixtures directly on top of his MDF spoilboard. With another gasket seal on the bottom, this customer was able prevent air pressure loss. This allowed him to MAX YOUR VAC and get more parts in less time.

He used our part CR 25 25 (1/4″ x 1/4″ with adhesive one side) and is thankful we were able to walk him though the concepts we have been offering 20+ years. How can we help you and your parts?

#allstarcnc #cncgasket #spoilboard #cncrouter #vacuumtable #MAXYOURVAC #cncwoodworking #cncwoodwork #cncwood #cncwoodrouter #cncguitars

FIXTURE FRIDAY 9/23/22

Parlor

Parlor Skis Utilizing The Versatile Surface Area of Our Tile Gasket (TG CR 06) to Cut The Core Shape of Their Snowboards.

A photo of a very happy customer of ours sent us this to demonstrate how they are utilizing our Tile Gasket material to improve their work holding on their CNC Router’s spoilboard. If you can’t hold it, you can’t cut it. Our clients around the country get more parts in less time with less waste. They can do this because we help them to MAX YOUR VAC by eliminating vacuum leak.

Anyone else having issues with part movement on your CNC router?

#allstarcnc #cncgasket #MAXYOURVAC #spoilboard #cncrouter #cncsnowboard #cncwoodworking #cncvacuum

MAX YOUR VAC with All Star CNC Products’ YouTube channel & Mike Murphy

 

Mike Murphy All Star CNC Products YouTube

MAX YOUR VAC with All Star CNC Products and Mike Murphy

YouTube Thumbnails

All Star CNC Products’ Video Playlist

No better source to MAX YOUR VAC for CNC Router operators than All Star CNC Products’ new and expanding YouTube Channel. It can be found at:

YouTube.com/c/ALLSTARCNCPRODUCTS

The videos we are creating are designed to help educate any shop having vacuum-related challenges when it comes to holding their parts. Our goal is to improve the vacuum clamping capabilities of CNC Routers, and to hold parts more securely for a higher degree in quality with less waste in both time in money. More parts in less time. MAX YOUR VAC with All Star CNC Products YouTube Videos.

#allstarcnc #cncrouter #MAXYOURVAC #spoilboard #madeinamerica #youtube #cncwoodworking #cncroutertable #cncgasket #cncwoodrouter

FIXTURE FRIDAY 9/6/22

All Star CNC_ Cover Gasket

Reduce The Number of Passes it Takes to Cut Small Parts Using Cover Gasket!

Great example of how proper gasket solutions can increase productivity. In this #FixtureFriday image, we can see where customer used a non-porous fixture to make an air-tight clamp on his parts. By doing so, he eliminated the need for cutting parts in two passes. For the 300,000 parts he had to make, that was a lot of unnecessary re-cuts in our opinion. More parts in less time is possible when you can MAX YOUR VAC.

#allstarcnc #cncrouter #spoilboard #covergasket #cncwood #cncwoodrouter #cncvacuum #cncroutertable