Posts tagged with "IWF ATLANTA"

CNC Collaboration with CR Onsrud

A big “THANK YOU” goes out to the team at CR Onsrud, Inc. for hosting All Star CNC and Head Coach Mike Murphy in town a few months back.

          We were asked to collaborate on some videos together, designed to educate customers on the importance of gasket and how crucial it is in getting the maximum performance out of a CNC Router’s vacuum table. They have amazing routers being made there in Troutman, NC capable of amazing things. So don’t let a leaky spoilboards or vacuum tables be the weak-link in terms of what size/speed/performance your router is capable of. Our Gaskets create an air-tight clamping environment, making more parts in less time. MAX YOUR VAC with All Star CNC Gasket Products.

CR Onsrud will be at #iwf2022 in a few weeks. Be sure to stop by and see what they have to offer!

All Star CNC Products will also be attending #iwf2022 in a few weeks. Come say hi and meet Head Coach Mike Murphy!

https://www.youtube.com/watch?v=2HEAyh9RpPQ

Fun Friday!

As IWF draws near once again we like to take a look at how much progress we’ve made over the last year.

We are always trying to improve vacuum performance and help CNC owners and operators MAX YOUR VAC.

This year we will be show casing our Tile Gasket which we’ve developed over the last year to increase vacuum surface area on MDF and other porous spoilboards. Excellent for Custom jobs, Nesting Programs, and Short Run applications.

Throw back to how funny our booth looked at the 2018 IWF show Pre-Covid. Come check us out this year and see how much progress we’ve made over the last 4 years, we’ll be show casing demos on our mini vacuum table using gasket.

 

IWF Atlanta

EDUCATIONAL SESSIONS

Increase CNC Router Performance by Improving Vacuum w/ Gasketing Products & Techniques

Tuesday, August 23  1:00 PM – 2:30 PM

When it comes to holding parts on a CNC Router, vacuum is the most common (and often only) method being used today.  With that being the case, why not maximize a vacuum’s performance if vacuum is the ONLY thing holding parts?

Shops will source everything from which router to invest in, to software, to tooling, to material, to employees and customers.  But when it comes time to actually cutting parts fast and effectively, was the router able to do it, yes or no?  If parts are too small, or onion skins or tabs are needed, or feed rates are painfully slow, or material is being wasted, or time is being wasted on re-setting up, than we need to improve the vacuum’s performance by eliminating leak.  Gasket products and solutions are the only way to improve a vacuum system’s performance.

In this session, you will learn how to eliminate vacuum pressure loss.  Users who hold parts better, make more parts in less time.  Whether it is small parts or large, production runs or custom work, wood or plastic, big vacuum systems or small, the same science always applies to eliminate vacuum pressure loss and we do this with gasketing products and techniques.

Presented by:

Mike Murphy

Head Coach at All*Star CNC Products, Inc

Michael Murphy has been assisting the owners and operators of CNC Routers for over twenty years. Michael’s area of concentration is in improving the vacuum hold performance of CNC Routers with gasketing products and techniques. He has assisted facilities of all sizes throughout North America fabricating a variety of materials across numerous industries. Michael enjoys the outdoor activities and lifestyle of Northern California, where he is Owner at All Star CNC Products, and especially when joined by his wife, Margo, and two young children.