An Essential Starting Point For Any Vacuum Table is The Gasket Between Your Grid Table and MDF Spoilboard. “The Lip of The Freezer Door” to Focus Your Vacuum Through The Top of Your MDF Spoilboard
The very first thing that is needed for CNC Router Vacuum success? Grid Gasket for the table itself. Get that air-tight seal and prevent leak from that gap that exists between the table and the spoilboard/fixture board.
What product produces the best vacuum performance for your table? Depends on the size of your table’s channels. Square channels need square gasket. And the proper size is crucial. Too short and there will not be a seal, causing vacuum leak. Too tall above the channel and the gasket will not be able to “zero out” on the z-depth, causing vacuum leak.
All Star custom cuts gasket to fit any table’s channel dimensions. In order to MAX YOUR VAC, start at the “foundation of the house” with proper Grid Gasket. Our customers have been getting more parts in less time for 20+ years because we help them reduce vacuum related challenges.
The Most Efficient Way to Hold Parts Securely is by Making a Dedicated Fixture Specific to Your Parts. Run Production Jobs in One Pass, Eliminate Onion Skins or Tabs. More Parts in Less Time. (Inboard Gasket CR 25 25)
This customer is putting his Dedicated Fixtures directly on top of his MDF spoilboard. With another gasket seal on the bottom, this customer was able prevent air pressure loss. This allowed him to MAX YOUR VAC and get more parts in less time.
He used our part CR 25 25 (1/4″ x 1/4″ with adhesive one side) and is thankful we were able to walk him though the concepts we have been offering 20+ years. How can we help you and your parts?
Parlor Skis Utilizing The Versatile Surface Area of Our Tile Gasket (TG CR 06) to Cut The Core Shape of Their Snowboards.
A photo of a very happy customer of ours sent us this to demonstrate how they are utilizing our Tile Gasket material to improve their work holding on their CNC Router’s spoilboard. If you can’t hold it, you can’t cut it. Our clients around the country get more parts in less time with less waste. They can do this because we help them to MAX YOUR VAC by eliminating vacuum leak.
Anyone else having issues with part movement on your CNC router?
If you plan to cut parts on your CNC router this week, remember…
If you are having trouble holding your parts properly somebody may tell you that you need to upgrade to a larger vacuum pump on your CNC vacuum table. That same person may tell you that if your ice cream is melting, that you’ll need a stronger, more powerful freezer. Upgrading either will cost money. Not just the cost of initial upgrade, but the increase cost of additional electricity consumption as well. We here at All Star CNC Products say, before upgrading your vacuum pump (or your freezer for that matter), make sure that all of your seals are preventing leak.
Vacuum pressure leak is why vacuum tables can’t hold parts. The proper gasket material is essential to holding parts. An air-tight system holds parts firmly in place, allowing to cut more parts in less time. MAX YOUR VAC with All Star CNC Products, your ONLY solution to CNC gasket.
Comes see us at #iwf2022 in Atlanta, booth B6524 to learn more about how we have been helping our customers maximize their vacuum performance for over two decades. #allstarcnc#cncgasket#cncrouter#spoilboard